ODI GRIP GLUE 5ml
Description
ODI Grip glue is designed to fasten grips to bars without damaging the grips. Eliminates grips slipping and turning around. This single 5ml tube is enough to install one pair of grips.
1x odi gripglue tube 5ml
IMPORTANT: The handlebars and grips must be absolutely (100%) free of grease, oil, dust or other contamination for proper use. Perfect function can only be guaranteed if it is absolutely clean.
Safety/Warnings:
There is the following information on the tube:
WARNING:
Flammable Mixture.
Do nut use or store near flame or fire.
VAPOR HARM:
Avoid Prolonged breathing of vapor.
Use with adequate ventilation. Avoid contact with skin and eyes.
KEEP OUR OF REACH OF CHILDREN
HARMFUL OR FATAL IF SWALLOWED
In case of eye contact, flush with water and seek medical attention. immediately.
DIRECTIONS:
> Clean surface thoroughly. Apply to handlebar on clutch side and to throttle tube
on throttle side. DO NOT allow any glue between the throttle tube and handlebar as this
may cause the throttle to stick.
> Slide grip onto tube or bar and twist into desired position.
> Remove any excess glue.
> Allow 5 minutes of dyring time prior to riding.
There is the following information/warning on the backside of the little blister packaging:
Product information: H71GG GRIP GLUE - 5mL
711484173455 (Barcode)
! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov